Tag Archives: planetary speed reducer

China OEM High Torque Power Transmission Part Speed Reducer Planetary Gear Boxes for Textile Machinery supplier

Product Description

Power Transmission Part Speed Reducer Planetary Gear Boxes For Textile Machinery

Planetary gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear. Customers can choose the right precision reducer according to the needs of the application.

Product Description

Characteristics:
1. Split design, more output options
2. The input and output dimensions can be seamlessly switched with the straight tooth series
3. The double support cage planet carrier has high reliability and is suitable for high-speed and frequent CZPT and reverse rotation
4. The design of double-stage single support support has high cost performance
5. Keyway can be opened for the force shaft
6. Helical gear transmission is more stable and has large bearing capacity
7. Accurate positioning of low return clearance
8. Specification range: 60-120mm
9. Speed ratio range: 3-100
10. Accuracy range: 1-3 arcmin (P1); 3-5 arcmin (P2)

Specifications				PW60	PW90	PW120
Technal Parameters				PW60	PW90	PW120
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	1350	3100	6100
Max. Axial Load			N	630	1300	2800
Torsional Rigidity			Nm/arcmin	5	10	20
Max.Input Speed			rpm	6000	6000	6000
Rated Input Speed			rpm	4000	3000	3000
Noise			dB	≤58	≤60	≤65
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥95% L2≥90%
Return Backlash	P1	L1	arcmin	≤3	≤3	≤3
	P1	L2	arcmin	≤5	≤5	≤5
	P2	L1	arcmin	≤5	≤5	≤5
	P2	L2	arcmin	≤7	≤7	≤7
Moment Of Inertia Table	L1	3	Kg*cm2	0.16	0.61	3.25
		4	Kg*cm2	0.14	0.48	2.74
		5	Kg*cm2	0.13	0.47	2.71
		7	Kg*cm2	0.13	0.45	2.62
		8	Kg*cm2	0.13	0.45	2.62
		10	Kg*cm2	0.13	0.40	2.57
	L2	12	Kg*cm2	0.13	0.61	0.45
		15	Kg*cm2	0.13	0.61	0.45
		20	Kg*cm2	0.13	0.45	0.45
		25	Kg*cm2	0.13	0.40	0.40
		28	Kg*cm2	0.13	0.45	0.45
		30	Kg*cm2	0.13	0.67	0.45
		35	Kg*cm2	0.13	0.45	0.45
		40	Kg*cm2	0.13	0.45	0.45
		50	Kg*cm2	0.13	0.40	0.40
		70	Kg*cm2	0.13	0.40	0.40
		100	Kg*cm2	0.13	0.40	0.40
Technical Parameter	Level	Ratio		PW60	PW90	PW120
Rated Torque	L1	3	Nm	35	100	165
		4	Nm	43	125	220
		5	Nm	43	125	220
		7	Nm	40	98	200
		8	Nm	40	90	200
		10	Nm	25	70	150
	L2	12	Nm	35	/	165
		15	Nm	35	100	165
		20	Nm	43	125	220
		25	Nm	43	125	220
		28	Nm	43	125	220
		30	Nm	35	100	165
		35	Nm	43	125	210
		40	Nm	43	125	210
		50	Nm	43	125	210
		70	Nm	40	98	200
		100	Nm	25	70	150
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	1.2	2.8	7.6
Weight	L2		kg	1.55	3.95	10.5

Company Profile

Packaging & Shipping

1. Lead time: 7-10 working days as usual, 20 working days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT

Application:	Machine Tool
Speed:	Low Speed
Function:	Driving
Casing Protection:	Closed Type
Starting Mode:	Direct on-line Starting
Certification:	ISO9001

Samples:	US$ 185/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

worm reducer

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducer Double throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducer Brass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China OEM High Torque Power Transmission Part Speed Reducer Planetary Gear Boxes for Textile Machinery supplier
editor by CX 2023-06-13

China High Quality Helical Bevel Gear Motor Speed Reductor Tractor Pot Worm Agricultural Planetary Gearbox for China Manufacturer Wholesale worm gear reducer buy

Merchandise Description

Substantial High quality Helical Bevel Gear Motor pace Reductor worm agricultural planetary Gearbox for China Maker Wholesale

US $10-999
/ Piece
| 100 Pieces

(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Three-Step

###

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

US $10-999
/ Piece
| 100 Pieces

(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Three-Step

###

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
worm reducer

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm reducer AGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm reducer AGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China High Quality Helical Bevel Gear Motor Speed Reductor Tractor Pot Worm Agricultural Planetary Gearbox for China Manufacturer Wholesale worm gear reducer buy
editor by czh 2023-01-18

China best quality worm gear reducer wpa speed reducer planetary gearbox worm gear backdrive

Applicable Industries: Industrial robots, creation automation
Fat (KG): 11 KG
Gearing Arrangement: Planetary
Output Torque: a hundred-160Nm
Enter Pace: 4000-8000RPM
Output Pace: 1-10000RPM
Product name: ideal top quality worm equipment reducer wpa velocity reducer planetary gearbox
Ratio: 3-ten, 15-one hundred
Micro Backlash PO: ≤1
Micro Backlash P1: ≤3
Micro Backlash P2: ≤5
Mounting Situation: All instructions
Application: Industrial robots, generation automation
Packaging Specifics: Plastic bag, foam and carton for every single established of planetary reducer. Or as asked for.
Port: ZheJiang

greatest quality worm gear reducer wpa velocity reducer planetary gearbox

YK precision planetary gearbox reducer attributes:Minimal sound: <65dbLow backlash: Min 3arcs for Single stage, Min 5 arcs for Double phase.Substantial torque: Increased torque in contrast to same amount common planetary gearbox reducer.High steadiness: Substantial-strength alloy metal as material, hardening treatment method for the entire gear elements but not only area hardening.High reduction ratio: Modular style to guarantee the high precision relationship.

Specialized Parameters of TER120

Phase	Unit	One particular Stage	Two Phase
Ratio	i	three, 4, 5, 6, 7, 8, 9, ten	15, 20, twenty five, 30, 35, forty, 45, fifty, sixty, 70, 80, 90, a hundred
Nominal Output Torque T 2N	Nm	one hundred thirty, a hundred and forty, one hundred sixty, 150, one hundred forty, one hundred twenty, one hundred, 100	130, a hundred and forty, one hundred sixty, 150, a hundred and forty, one hundred twenty, one hundred, one hundred sixty, a hundred and fifty, a hundred and forty, 120, a hundred, a hundred
Emergency Quit Torque T 2NOT¹	Nm	three Instances of Nominal Output Torque	3 Moments of Nominal Output Torque
Nominal Enter Pace n 1N	rpm	4000	4000
Max Input Velocity n 1B	rpm	8000	8000
Micro Backlash P0	arcmin	≤1	≤1
Micro Backlash P1	arcmin	≤3	≤5
Micro Backlash P2	arcmin	≤5	≤7
Torsional Rigidity	Nm/arcmin	seven	7
Max Radial Load F 2rB²	N	3250	3250
Max Axial Load F 2aB²	N	1625	1625
Provider Lifestyle ³	hr	20000(Continually ten thousand)	20000(Continually 10000)
Effectiveness η	%	≥97%	≥94%
Excess weight	kg	three.seven	five.three
Operating Temp	°C	-10°C ~ +90°C	-10°C ~ +90°C
Lubrication		Artificial Lubrication Oils	Artificial Lubrication Oils
Mounting Place		All direcstions	All direcstions
Sound (n=3000rpm, i=10, No load)	dB(A)	≤60	≤60
Mass Moments of Inertia J_one	kg.cm^two	.61, .48, .forty seven, .45, .45, .forty four, .44, .44, 044	.forty seven, .forty seven, .forty seven, .47, .47, .47, .forty seven, .44, .forty four, .forty four, .44, .forty four, .forty four

Notes: 1. Max acceleration torque T=sixty% of T_2NOT.
_{2. Used to the output shaft centre at 100rpm.}
_{3. For steady operation, the provider lifestyle time is no much less than 10,000hrs.}

Company Data and Our Provider Packing and Shipping and delivery FAQQ: How extended is your shipping time?A: Typically it is 10 days if the items are in inventory. or it is all around thirty times if the products are not in stock, it is according to quantity.
Q: Do you offer samples ? is it cost-free or extra ?A: Sure, we could offer you the sample but not cost-free, and do not spend the expense of freight.
Q: What is your terms of payment ?A: Payment=1000USD, thirty% T/T in progress, equilibrium before shippment.If you have one more question, pls really feel totally free to contact us as underneath:

Worm gear reducer

Cheaper than planetary gearboxes In many cases, worm gear reducers are a popular alternative to planetary gearboxes. A worm gear reducer is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducers are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
worm_reducer

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer to reduce vibration without damaging the output shaft.
Compact worm gear reducers are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducers are ideal for applications that require precision, repeatability, and efficient performance. These reducers are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducers through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducers are more efficient than their counterparts.
The high-efficiency worm reducer is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducers include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducers can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
worm_reducer

low clearance

A low-clearance worm reducer is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducers can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducers are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducers are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducers are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducers can be upgraded to improve their performance by combining with other gear trains or gearboxes.
worm_reducer

easy to replace

An easily replaceable worm gear reducer can save you a lot of money. A worm gear reducer is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducers can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducers offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducers is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducers are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer for your equipment.
When replacing the worm gear reducer, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

China best quality worm gear reducer wpa speed reducer planetary gearbox worm gear backdrive
editor by czh

China supplier Transmission Motor Gearbox Unit Wp Nmrv Swl Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox near me manufacturer

Product Description

Transmission Motor Gearbox Unit Wp Nmrv Swl Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox

Features

1. Compact structure and simple assembly;
2. Wide speed ranges and high torque;
3. Low noise, good sealing performance, high efficiency;
4. Stable and safe, long lifetime, universal;
5. Multi-structure, various assembling methods

Product Photos

Product Description

ANG Helical Gear Reducer
Model	R17 ~ 187, F37-177, K37-187, S37-97, HB01-26
Input power	0.06kw ~ 5000kw
Input speed	750rpm ~ 3000rpm
Reduction ratio	1/1.3 ~ 1/27000
Input motor	AC (1 phase or 3 phase) / DC / BLDC motor
Install type	Foot / Solid shaft / Hollow shaft / Output flange…
Efficiency	94% ~ 98 % for R F K series
Material of housing	die-cast aluminum / Cast iron / Stainless steel
Precision of gear	Accurate grinding, class 6
Heat treatment	Carburizing and quenching
Accessories	Brake / Flange / Motor adapter / Torque arm …

Advantages

FAQ

Q: Can you make the gearbox with customization?
A: Yes, we can customize per your request, like power, voltage, speed, shaft size, flange, terminal box, IP grade, etc.

Q: Do you provide samples?
A: Yes. The sample is available for testing.

Q: What is your MOQ?
A: It is 1pcs for the beginning of our business.

Q: What’s your lead time?
A: Standard product need 5-30days, a bit longer for customized products.

Q: Do you provide technical support?
A: Yes. Our company have design and development team, we can provide technical support if you
need.

Q: How to ship to us?
A: It is available by air, or by sea, or by train.

Q: How to pay the money?
A: T/T and L/C are preferred, with a different currency, including USD, EUR, RMB, etc.

Q: How can I know the product is suitable for me?
A: >1^ST confirm drawing and specification >2^nd test sample >3^rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.

Q: How shall we contact you?
A: You can send inquiry directly, and we will respond within 24 hours.

Screw Shaft Features Explained

When choosing the screw shaft for your application, you should consider the features of the screws: threads, lead, pitch, helix angle, and more. You may be wondering what these features mean and how they affect the screw’s performance. This article explains the differences between these factors. The following are the features that affect the performance of screws and their properties. You can use these to make an informed decision and purchase the right screw. You can learn more about these features by reading the following articles.

Threads

The major diameter of a screw thread is the larger of the 2 extreme diameters. The major diameter of a screw is also known as the outside diameter. This dimension can’t be directly measured, but can be determined by measuring the distance between adjacent sides of the thread. In addition, the mean area of a screw thread is known as the pitch. The diameter of the thread and pitch line are directly proportional to the overall size of the screw.
The threads are classified by the diameter and pitch. The major diameter of a screw shaft has the largest number of threads; the smaller diameter is called the minor diameter. The thread angle, also known as the helix angle, is measured perpendicular to the axis of the screw. The major diameter is the largest part of the screw; the minor diameter is the lower end of the screw. The thread angle is the half distance between the major and minor diameters. The minor diameter is the outer surface of the screw, while the top surface corresponds to the major diameter.
The pitch is measured at the crest of a thread. In other words, a 16-pitch thread has a diameter of 1 sixteenth of the screw shaft’s diameter. The actual diameter is 0.03125 inches. Moreover, a large number of manufacturers use this measurement to determine the thread pitch. The pitch diameter is a critical factor in successful mating of male and female threads. So, when determining the pitch diameter, you need to check the thread pitch plate of a screw.
screwshaft

Lead

In screw shaft applications, a solid, corrosion-resistant material is an important requirement. Lead screws are a robust choice, which ensure shaft direction accuracy. This material is widely used in lathes and measuring instruments. They have black oxide coatings and are suited for environments where rusting is not acceptable. These screws are also relatively inexpensive. Here are some advantages of lead screws. They are highly durable, cost-effective, and offer high reliability.
A lead screw system may have multiple starts, or threads that run parallel to each other. The lead is the distance the nut travels along the shaft during a single revolution. The smaller the lead, the tighter the thread. The lead can also be expressed as the pitch, which is the distance between adjacent thread crests or troughs. A lead screw has a smaller pitch than a nut, and the smaller the lead, the greater its linear speed.
When choosing lead screws, the critical speed is the maximum number of revolutions per minute. This is determined by the minor diameter of the shaft and its length. The critical speed should never be exceeded or the lead will become distorted or cracked. The recommended operational speed is around 80 percent of the evaluated critical speed. Moreover, the lead screw must be properly aligned to avoid excessive vibrations. In addition, the screw pitch must be within the design tolerance of the shaft.

Pitch

The pitch of a screw shaft can be viewed as the distance between the crest of a thread and the surface where the threads meet. In mathematics, the pitch is equivalent to the length of 1 wavelength. The pitch of a screw shaft also relates to the diameter of the threads. In the following, the pitch of a screw is explained. It is important to note that the pitch of a screw is not a metric measurement. In the following, we will define the 2 terms and discuss how they relate to 1 another.
A screw’s pitch is not the same in all countries. The United Kingdom, Canada, and the United States have standardized screw threads according to the UN system. Therefore, there is a need to specify the pitch of a screw shaft when a screw is being manufactured. The standardization of pitch and diameter has also reduced the cost of screw manufacturing. Nevertheless, screw threads are still expensive. The United Kingdom, Canada, and the United States have introduced a system for the calculation of screw pitch.
The pitch of a lead screw is the same as that of a lead screw. The diameter is 0.25 inches and the circumference is 0.79 inches. When calculating the mechanical advantage of a screw, divide the diameter by its pitch. The larger the pitch, the more threads the screw has, increasing its critical speed and stiffness. The pitch of a screw shaft is also proportional to the number of starts in the shaft.

Helix angle

The helix angle of a screw shaft is the angle formed between the circumference of the cylinder and its helix. Both of these angles must be equal to 90 degrees. The larger the lead angle, the smaller the helix angle. Some reference materials refer to angle B as the helix angle. However, the actual angle is derived from calculating the screw geometry. Read on for more information. Listed below are some of the differences between helix angles and lead angles.
High helix screws have a long lead. This length reduces the number of effective turns of the screw. Because of this, fine pitch screws are usually used for small movements. A typical example is a 16-mm x 5-inch screw. Another example of a fine pitch screw is a 12x2mm screw. It is used for small moves. This type of screw has a lower lead angle than a high-helix screw.
A screw’s helix angle refers to the relative angle of the flight of the helix to the plane of the screw axis. While screw helix angles are not often altered from the standard square pitch, they can have an effect on processing. Changing the helix angle is more common in two-stage screws, special mixing screws, and metering screws. When a screw is designed for this function, it should be able to handle the materials it is made of.
screwshaft

Size

The diameter of a screw is its diameter, measured from the head to the shaft. Screw diameters are standardized by the American Society of Mechanical Engineers. The diameters of screws range from 3/50 inches to 16 inches, and more recently, fractions of an inch have been added. However, shaft diameters may vary depending on the job, so it is important to know the right size for the job. The size chart below shows the common sizes for screws.
Screws are generally referred to by their gauge, which is the major diameter. Screws with a major diameter less than a quarter of an inch are usually labeled as #0 to #14 and larger screws are labeled as sizes in fractions of an inch. There are also decimal equivalents of each screw size. These measurements will help you choose the correct size for your project. The screws with the smaller diameters were not tested.
In the previous section, we described the different shaft sizes and their specifications. These screw sizes are usually indicated by fractions of an inch, followed by a number of threads per inch. For example, a ten-inch screw has a shaft size of 2” with a thread pitch of 1/4″, and it has a diameter of 2 inches. This screw is welded to a two-inch Sch. 40 pipe. Alternatively, it can be welded to a 9-inch O.A.L. pipe.
screwshaft

Shape

Screws come in a wide variety of sizes and shapes, from the size of a quarter to the diameter of a U.S. quarter. Screws’ main function is to hold objects together and to translate torque into linear force. The shape of a screw shaft, if it is round, is the primary characteristic used to define its use. The following chart shows how the screw shaft differs from a quarter:
The shape of a screw shaft is determined by 2 features: its major diameter, or distance from the outer edge of the thread on 1 side to the inner smooth surface of the shaft. These are generally 2 to 16 millimeters in diameter. Screw shafts can have either a fully threaded shank or a half-threaded shank, with the latter providing better stability. Regardless of whether the screw shaft is round or domed, it is important to understand the different characteristics of a screw before attempting to install it into a project.
The screw shaft’s diameter is also important to its application. The ball circle diameter refers to the distance between the center of 2 opposite balls in contact with the grooves. The root diameter, on the other hand, refers to the distance between the bottommost grooves of the screw shaft. These are the 2 main measurements that define the screw’s overall size. Pitch and nominal diameter are important measurements for a screw’s performance in a particular application.

Lubrication

In most cases, lubrication of a screw shaft is accomplished with grease. Grease is made up of mineral or synthetic oil, thickening agent, and additives. The thickening agent can be a variety of different substances, including lithium, bentonite, aluminum, and barium complexes. A common classification for lubricating grease is NLGI Grade. While this may not be necessary when specifying the type of grease to use for a particular application, it is a useful qualitative measure.
When selecting a lubricant for a screw shaft, the operating temperature and the speed of the shaft determine the type of oil to use. Too much oil can result in heat buildup, while too little can lead to excessive wear and friction. The proper lubrication of a screw shaft directly affects the temperature rise of a ball screw, and the life of the assembly. To ensure the proper lubrication, follow the guidelines below.
Ideally, a low lubrication level is appropriate for medium-sized feed stuff factories. High lubrication level is appropriate for larger feed stuff factories. However, in low-speed applications, the lubrication level should be sufficiently high to ensure that the screws run freely. This is the only way to reduce friction and ensure the longest life possible. Lubrication of screw shafts is an important consideration for any screw.

China supplier Transmission Motor Gearbox Unit Wp Nmrv Swl Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox near me manufacturer

China Hot selling Gear Units, Reducer, Geared Motor, Speed Reducer, Screw Jack, Planetary Reducer, Worm Type Reducer with Free Design Custom

Product Description

Technical Parameter

Housing material	HT200 high-strength cast iron(EWR37, EWR47, EWR57, EWR67, EWR77, EWR87)
Housing material	HT250 High strength cast iron(EWR97, EWR 107, EWR137, EWR147, EWR167)
Gear material	20CrMnTi
Gear Surface&hardness	HRC58°-62°
Gear core hardness	HRC33°-78°
Input/Output shaft material	40Cr
Gear Machining precision	Accurate grinding 6-5 grade
Heat treatment	Carburizing, Quenching etc
Efficiency	Up to 92%
Noise(Max)	60-67dB
Installation type	Foot mounted, flange mounted
Output type	Solid shaft
Bearing brand	NSK, SKF, HRB, ZWZ etc
Oil seal brand	NAK, KSK etc
Lubricant	VG220
Motor	IP55, F class
Motor shaft	40Cr, Carburizing, Quenching etc
Warranty	12months
Color	Blue, Grey

Model	EWR37	EWR47	EWR57	EWR67	EWR77	EWR87	EWR97	EWR107	EWR137	EWR147	EWR167
Weight	9	14	24	27	33	60	110	150	255	365	615
Shaft Ф	25mm	30mm	35mm	35mm	40mm	50mm	60mm	70mm	90mm	110mm	120mmProdu

PRODUCT IMAGES

Features
♦Specially designed for agitator.
♦Compact structure, Integrated casting housing, low noise and long service life.
♦High efficiency and low maintenance.

Design
♦ Reducing Ratio: 2 stage 5~24.8, 3 stage 27.2~264, EWR/EWR combination type can be up to 18125.
♦ Mounting Type: Foot mounted, Flange mounted.
♦ Output Shaft: Solid shaft.
♦ Efficiency: Two-stage96%, three-stage 94%, and combination of EWR/EWR85%.

Technical Data
♦Size EWR37-EWR167
♦ Output Torque 130~18000N. M
♦ Motor Power 0.18~160kw
♦ Ratio 5~264(imax: 18125)

Industrial Application
♦Power Plant Equipment
♦Metallurgical Industry
♦Metal Forming Machinery
♦Petrochemical Industry
♦Mining Machine
♦Hoisting Machinery
♦Construction Industry
♦Environmental Protection Industry
♦Cable Industry
♦Food Machinery

Certificates
Passed ” ISO 9001 International Quality System Certificate”, “Europe CE Certificate”, ” Swiss SGS Certificate”, “High-tech enterprise certificate of ZheJiang city”, “Excellent performance management enterprise of ZheJiang city”, etc.

FAQ
1. Q: Can you make as per customer drawing?
A: Yes, we offer customized service for customers.

2. Q: Are you a factory or trading company?
A. We are a manufacturer in ZheJiang , China.

3. Q: What’s your MOQ?
A: One piece.

4. Q: Wha’s yout quality control system?
A: We are certified with CE,CCC,ISO 9001. We have own independent QC team * advanced equipments to ensure quality from material purchasing til goods delivery.

5. Q: What’s your production time?
A: 15-35 working days after receiving payment.

6. Q: What’s your payment terms?
A: T/T, 30% payment in advance, 70% balance payment should be paid before shipping.

7. Q: What’s your package?
A: In wooden box packaging.

Company information

ZheJiang EASTWELL Gear Reducer Co., Ltd. is a large professional manufacturer & exporter of various helical gear reducers and specialize in the gear reducers area in China for 20 years. EASTWELL has excellent R&D team, top-ranking production and test equipment. So we have the strong power in the developing and manufacturing the standards type as well as the customized type gear reducer for our customers.

We make and supply 6 series of speed reducer as follows:
EWK series helical-bevel gear reducers,
EWR series helical gear reducers,
EWF series helical gear reducers,
EWS series helical-worm gear reducers
HB series gearboxes,
P series planetary gear reducers,etc.

Our products have been exporting to many countries and regions, including but not limited Argentina , Brazil, Mexico, Columbia , Ecuador , USA, South Korea, Vietnam, Indonesia, Georgia, South Africa, China HK, China Taiwai,

Welcome to send us enquiry or drawing. Visit us in ZheJiang , China.

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are 2 main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on 1 side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between 2 and 16 inches. A screw with a pointy tip has a smaller major diameter than 1 without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is 1 element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.
screwshaft

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of 1 thread to the corresponding point on the next thread. Measurement is made from 1 thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in 1 revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
screwshaft

The lead of a screw shaft

Pitch and lead are 2 measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are 2 ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with 2 or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are 2 types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
screwshaft

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

China Hot selling Gear Units, Reducer, Geared Motor, Speed Reducer, Screw Jack, Planetary Reducer, Worm Type Reducer with Free Design Custom

China manufacturer Gear Units, Reductor, Reducer, Geared Motor, Speed Reducer, Screw Jack, Planetary Reducer, Worm Type Reducer with Good quality

Product Description

Technical Parameter

Housing material	HT200 high-strength cast iron(EWR37, EWR47, EWR57, EWR67, EWR77, EWR87)
Housing material	HT250 High strength cast iron(EWR97, EWR 107, EWR137, EWR147, EWR167)
Gear material	20CrMnTi
Gear Surface&hardness	HRC58°-62°
Gear core hardness	HRC33°-78°
Input/Output shaft material	40Cr
Gear Machining precision	Accurate grinding 6-5 grade
Heat treatment	Carburizing, Quenching etc
Efficiency	Up to 92%
Noise(Max)	60-67dB
Installation type	Foot mounted, flange mounted
Output type	Solid shaft
Bearing brand	NSK, SKF, HRB, ZWZ etc
Oil seal brand	NAK, KSK etc
Lubricant	VG220
Motor	IP55, F class
Motor shaft	40Cr, Carburizing, Quenching etc
Warranty	12months
Color	Blue, Grey

Model	EWR37	EWR47	EWR57	EWR67	EWR77	EWR87	EWR97	EWR107	EWR137	EWR147	EWR167
Weight	9	14	24	27	33	60	110	150	255	365	615
Shaft Ф	25mm	30mm	35mm	35mm	40mm	50mm	60mm	70mm	90mm	110mm	120mmProdu

PRODUCT IMAGES

Features
♦Specially designed for agitator.
♦Compact structure, Integrated casting housing, low noise and long service life.
♦High efficiency and low maintenance.

Technical Data
♦Size EWR37-EWR167
♦ Output Torque 130~18000N. M
♦ Motor Power 0.18~160kw
♦ Ratio 5~264(imax: 18125)

FAQ
1. Q: Can you make as per customer drawing?
A: Yes, we offer customized service for customers.

2. Q: Are you a factory or trading company?
A. We are a manufacturer in ZheJiang , China.

3. Q: What’s your MOQ?
A: One piece.

5. Q: What’s your production time?
A: 15-35 working days after receiving payment.

6. Q: What’s your payment terms?
A: T/T, 30% payment in advance, 70% balance payment should be paid before shipping.

7. Q: What’s your package?
A: In wooden box packaging.

Company information

Welcome to send us enquiry or drawing. Visit us in ZheJiang , China.

Screw Shaft Types

If you’re looking for a screw shaft, but aren’t sure which type to buy, you’re in luck. In this article, we’ll talk about the different types, including Threaded shank, Round head, and Machined. Once you’ve read it, you’ll know which type to buy. Then, you can decide whether you want a ball screw nut or a threaded shank.

Machined screw shafts

Besides the standard stainless steel shaft, manufacturers also provide a variety of other materials, such as titanium, bronze, and brass. In addition to stainless steel, manufacturers also provide a variety of top-coating options, including zinc, brass, and chromium. Aluminum screws are not particularly durable and are easily affected by weather. Most screw shafts feature self-locking mechanisms. They are especially useful in C-clamps, vises, and screw-top container lids.
For applications where accuracy is vital, a ball screw shaft needs to be annealed. A heat treatment can be performed on the ball screw shaft to ensure that both ends are heated evenly. In this process, the shaft will be more durable, while maintaining its high-precision properties. These screw shafts are a key component in computer-controlled motion-control systems, wire bonding, and other industries that require high-precision and high-quality performance.
Depending on the material used, screw shafts can be made of stainless steel or titanium. High-precision CNC machines and lathes are typically used to manufacture screw shafts. Various shapes and sizes are available, each with a specific application. Whether you need a small or large screw, you can find 1 to fit your needs. And since each size requires a different material, your choice of material is important as well.
In general, the materials used for machining screw shafts are steel, stainless steel, titanium, brass, bronze, and aluminum. Metals that resist corrosion are also commonly used. Other materials for screw shafts are Teflon, nylon, and nylon. You can also find threaded screw shafts in materials such as porcelain, glass, and ceramic. If you want to use your screws in a unique material, consider purchasing a customized one.
screwshaft

Ball screw nuts

If you have a screw shaft, the last thing you want to worry about is the ball nut slipping off. To prevent this, you can place a temporary stop in the shaft’s grooves to ensure that the ball nut does not slide off. When you remove the stop, you can then install the ball screw nut. But, before you can install the ball screw nut, you have to make sure that you have a good grip on the shaft.
When selecting ball screw nuts, it’s important to consider how much preload you need to apply to avoid excessive backlash. Preloading eliminates this problem by making the ball nut compact. It also prevents backlash, which is lost motion caused by clearance between the ball and nut. Backlash disrupts repeatability and accuracy. This is where spacer preloading comes in. You can insert a spacer between the 2 ball nuts to transmit the force to the nut. However, you should keep in mind that this method reduces the load capacity of the ball screw.
The critical speed of a screw is the maximum rotating speed before it whips. This critical speed is influenced by several factors, including the diameter of the screw shaft, the number of support elements, and the material. By adjusting these factors, you can reduce the number of components used and the amount of time it takes to assemble the screw shaft. In addition, you can also reduce the number of components and avoid stacking tolerances. However, the critical speed of plastic nuts is limited due to sliding friction.
The ball screw nut has several characteristics that make it unique. Its most prominent feature is the presence of ball bearings. These balls help reduce friction between the screw nut and the shaft. Without ball bearings, the friction would be too high to function properly. Another important characteristic is the groove profile of the nut and ball. These 2 features ensure that the ball and the nut meet at 2 points. You’ll be amazed by the results of the work of these ball screw nuts.
screwshaft

Threaded shank

Wood screws are usually not fully threaded because the shank has an unthreaded portion at the top. This shoulder part forces the screw to compress 2 pieces of wood, which prevents the screw from overheating and compromising the materials strength. As the screw is threaded partially up, it is not as difficult to remove as a fully threaded screw. However, it is important to note that a wood screw will not hold as tightly as 1 with a fully threaded shank.
In addition to being universal, screw threads can be of different sizes. For example, a M8 screw has a thread pitch of 1.25 mm. To avoid confusion, screw thread pitches are commonly given with a multiplication sign. For example, M8x1 means that the screw is 8 mm in diameter but has a thread pitch of 1 mm per 360-degree rotation. Those who are not familiar with these dimensions may find it confusing.
The OD of the threaded portion of a bolt is generally smaller than the OD of the nut. If the shank is too deep for the nut to fit, the threads may bottom out. This is why it’s important to use a thread-cutting bit with a small thread diameter. You can use a micrometer or caliper to measure the thread diameter. This tool will also allow you to easily identify which screw size fits where and how well.
The metric system is the most widely used. Fasteners with DIN numbers are generally metric in size. This makes them very useful for industrial settings. You can find metric-sized screws anywhere, as long as you buy them from a reputable manufacturer. These fasteners also come with a dog point, which is used for safety wire. If the screw needs to be replaced, the shank can be drilled with a hole for a safety wire or for a dog-point.

Round head

A round head screw is the most common type used for machine screws. Other common types include truss head, flat head, and hexed head. Each has a different profile and are used for different purposes. A round head screw is typically wider than a flat or a hexed head, and has a slightly rounded surface. These screws are useful for projects involving sheet metal or sheet-metal parts. Round heads are usually slightly wider than a hex head screw, and they may also be used as a substitute for washers in certain applications. However, truss heads are not necessary for every project.
A wood screw has a smooth shank that protrudes above the surface of the material it is attaching. A metal screw has a threaded shaft that is fully threaded from head to point, and a fully threaded shaft provides more bite. Two common head styles are round head and pan head. If the task requires the screw to be flush or countersunk, the round head will be the best choice.
Another type is the Reed & Prince screw drive. These are similar to Phillips screws but have a 75-degree V shape. They are commonly used in marine hardware and are also known as BNAE NFL22-070. This type is also used for steel plate hangers. In addition to round head and pan head screws, there are a variety of other screw types. You can even get a head with a slotted head if you know where to look.
Screw diameters are specified according to the ISO 261 or ISO 262 standards. An M8 screw has a diameter of 8.25 mm. The M8 screw has a pitch of 1.25 mm, which is equivalent to 1 mm per 360 degrees. There are several other standard screw sizes and thread diameters available. You can find them all by consulting the relevant standards. But remember, the metric system is the most popular.
screwshaft

Self-locking mechanism

A self-locking mechanism for a screw shaft is a device that secures the screw to its supporting member in a failure position. The locking mechanism provides a positive connection between the screw shaft and the control surface during normal operation, and locks the screw to its supporting member when the screw fails. Previous attempts to solve this problem have typically used secondary nuts with free play on the screw, which were intentionally designed to jam when loaded. However, such a device can be unreliable, which is why the present invention offers a more robust and reliable locking mechanism.
The self-locking function of a screw depends on several factors, including its pitch angle and the coefficient of friction of the threads. The angle of friction must be less than the tangent of the material pairing to prevent untightening of the screw. Screws with self-locking mechanisms have an efficiency e lower than 50%, which is less than half. Self-locking screws also have the benefit of being less efficient than a standard screw.
Unlike a normal screw, a self-locking screw can be turned in either direction. The nut 22 rotates with the screw shaft, and the member 23 is translated in an axial direction. Regardless of the direction of the rotation of the screw, this axial translation will result in the opposite moment to that input moment. While screw self-locking mechanisms are typically less expensive, they are more reliable and durable.
Another important feature of self-locking screws is that they are not susceptible to independent loosening. The screw cannot rotate without a certain amount of torque. In addition, a self-locking screw shaft must have a small wedge with a smaller half-angle than the arctangent of the static friction. This means that the torque applied by the driver must be greater than the torque needed to overcome the friction.

China manufacturer Gear Units, Reductor, Reducer, Geared Motor, Speed Reducer, Screw Jack, Planetary Reducer, Worm Type Reducer with Good quality

China supplier Planetary Gearbox Cast Iron Worm Gearbox Shaft Speed Reducer with Free Design Custom

Guarantee: 1 calendar year, One yr
Relevant Industries: Accommodations, Garment Retailers, Creating Content Retailers, Manufacturing Plant, Equipment Restore Retailers, Meals & Beverage Factory, Farms, Restaurant, Property Use, Retail, china tiny marine hydraulic gearbox boat used for diesel engine D300A in stock Foodstuff Shop, Printing Shops, Building works , Strength & Mining, Meals & Beverage Stores, Advertising and marketing Organization, robotic
Weight (KG): 3.6 KG
Customized support: OEM
Gearing Arrangement: Planetary
Output Torque: 48-a hundred and sixty
Input Speed: 3000r/min
Output Pace: planetary reducer
Biggest Output Torque: a hundred and forty four-480
Permissible Radial Drive: 3250
Pressure: 1300-1625
Life Time: 20000 Hrs
Internet Bodyweight: 72 KG
Sound: ≤60
Software: IndustrialRoboticsMedicalDefenseAerospace
Item identify: planetary gearbox
Colour: Sliver
Packaging Specifics: 1 Set of reducer in 1 normal carton

Planetary Gearbox Forged Iron Worm Gearbox Shaft Velocity Reducer

1.Photograph for PX collection planetary gearbox

2.Paramater for PX sequence planetary gearbox

ZHangZhoug Qiyue Mechanical Technologies Co., Substantial Transmission Hypoid Equipment Box Torque Equipment Velocity Reducer Manufactures Worm Reduction Transmission Gearbox ltd. (ARCSEC) is your total resource for equipment reducers, couplings, linear mounting kits, and other revolutionary merchandise employed in automation technology.With 1 of the greatest merchandise offerings in the motion handle industry as effectively as the engineering experience and manufacturing capabilities to supply custom-made answers, ARCSEC can help with your software.Getting versatile to meet up with the demands of buyer requests and wonderful services are what established ARCSEC apart from the relaxation.

2. Why Select Us

one. Skilled manufacturing unit for harmonic travel with specialist engineer staff test staff and sale staff
two. With GB/T 19001-2008 / ISO9001:2008 certification manufacturing facility
3. Strong Assets factory can give future and secure provider
four. Very good and stable quality let you use gratifying.
five. Prolonged provider existence and aggressive cost
six. Fast Reply and Excellent Sevice

three. How To Buy Planetary Gearbox

Search Goods
Send out inquiry to sale with drawing order specialized detailes.

Verify and Recheck
Confirm model reduction ratiotype and price tag.

Affirm Get
We will give you proformma bill to you.You sign back again to affirm order.

Payment
payments method avaliable(TT LC at sight).

Shipment
Normal export box packaing and delievery by the carrier you preferred, by sea ,by air.

Value Saving
Soon after receive goods use it beneath very best atmosphere.

Why Checking the Drive Shaft is Critical

If you listen to clicking noises while driving, your driveshaft may possibly require mend. An experienced mechanic can notify if the sound is coming from one particular aspect or equally sides. This problem is typically associated to the torque converter. Read on to discover why it is so critical to have your driveshaft inspected by an automobile mechanic. Listed here are some signs to appear for. Clicking noises can be triggered by several various things. You ought to 1st verify if the sounds is coming from the front or the rear of the car.
air-compressor

hollow generate shaft

Hollow driveshafts have numerous benefits. They are light and lessen the general weight of the vehicle. The premier company of these components in the planet is CZPT. They also provide light-weight answers for different applications, this kind of as substantial-efficiency axles. CZPT driveshafts are produced employing point out-of-the-artwork technological innovation. They supply exceptional high quality at aggressive rates.
The interior diameter of the hollow shaft lowers the magnitude of the inner forces, therefore lowering the sum of torque transmitted. Unlike strong shafts, hollow shafts are acquiring more robust. The materials within the hollow shaft is slightly lighter, which more minimizes its bodyweight and all round torque. Even so, this also boosts its drag at high speeds. This means that in numerous applications hollow driveshafts are not as effective as reliable driveshafts.
A conventional hollow push shaft is composed of a very first rod fourteen and a next rod 14 on both sides. The first rod is linked with the next rod, and the next rod extends in the rotation route. The two rods are then friction welded to the central spot of the hollow shaft. The frictional heat generated during the relative rotation helps to hook up the two areas. Hollow travel shafts can be used in inner combustion engines and environmentally-pleasant autos.
The main advantage of a hollow driveshaft is fat reduction. The splines of the hollow push shaft can be made to be smaller sized than the exterior diameter of the hollow shaft, which can considerably lessen excess weight. Hollow shafts are also significantly less probably to jam when compared to strong shafts. Hollow driveshafts are expected to ultimately occupy the planet market for automotive driveshafts. Its rewards include fuel efficiency and higher versatility when compared to strong prop shafts.

Cardan shaft

Cardan shafts are a well-known selection in industrial equipment. They are utilized to transmit electrical power from 1 equipment to one more and are offered in a variety of sizes and designs. They are accessible in a selection of resources, including steel, copper, and aluminum. If you strategy to install a single of these shafts, it is critical to know the different types of Cardan shafts available. To uncover the best alternative, search the catalog.
Telescopic or “Cardan” prop shafts, also recognized as U-joints, are best for productive torque transfer among the drive and output method. They are effective, lightweight, and power-successful. They use advanced strategies, which includes finite component modeling (FEM), to make sure greatest overall performance, excess weight, and efficiency. In addition, the Cardan shaft has an adjustable length for straightforward repositioning.
Yet another well-liked selection for driveshafts is the Cardan shaft, also known as a driveshaft. The function of the driveshaft is to transfer torque from the motor to the wheels. They are typically used in high-overall performance auto engines. Some types are created of brass, iron, or steel and have exclusive surface styles. Cardan shafts are accessible in inclined and parallel configurations.
Single Cardan shafts are a frequent substitute for normal Cardan shafts, but if you are looking for dual Cardan shafts for your vehicle, you will want to decide on the 1310 collection. This type is fantastic for lifted jeeps and demands a CV-appropriate transfer scenario. Some even demand axle spacers. The twin Cardan shafts are also designed for lifts, which indicates it really is a very good decision for boosting and lowering jeeps.
air-compressor

common joint

Cardan joints are a excellent decision for drive shafts when functioning at a continuous speed. Their design and style makes it possible for a continual angular velocity ratio in between the enter and output shafts. Based on the software, the recommended pace restrict might vary relying on the working angle, transmission electricity, and application. These suggestions need to be dependent on strain. The highest permissible velocity of the push shaft is identified by determining the angular acceleration.
Because gimbal joints will not require grease, they can final a extended time but ultimately fail. If they are inadequately lubricated or dry, they can cause steel-to-steel speak to. The same is real for U-joints that do not have oil filling ability. Although they have a long lifespan, it can be hard to spot warning symptoms that could point out impending joint failure. To keep away from this, examine the drive shaft regularly.
U-joints need to not exceed seventy p.c of their lateral critical velocity. Even so, if this speed is exceeded, the element will knowledge unacceptable vibration, decreasing its valuable lifestyle. To figure out the ideal U-joint for your application, you should contact your common joint provider. Normally, lower speeds do not call for balancing. In these cases, you should think about employing a larger pitch diameter to decrease axial power.
To minimize the angular velocity and torque of the output shaft, the two joints should be in section. For that reason, the output shaft angular displacement does not fully comply with the input shaft. Instead, it will lead or lag. Determine 3 illustrates the angular velocity variation and peak displacement direct of the gimbal. The ratios are demonstrated below. The proper torque for this application is 1360 in-Ibs.

Refurbished push shaft

Refurbished driveshafts are a great choice for a variety of reasons. They are more affordable than brand name new alternate options and generally just as reputable. Driveshafts are vital to the operate of any auto, truck, or bus. These components are manufactured of hollow metal tubes. Even though this aids decrease excess weight and expenditure, it is susceptible to external influences. If this transpires, it could crack or bend. If the shaft suffers this sort of hurt, it can trigger severe harm to the transmission.
A car’s driveshaft is a critical component that transmits torque from the engine to the wheels. A1 Drive Shaft is a global supplier of automotive driveshafts and connected parts. Their factory has the ability to refurbish and mend virtually any make or product of driveshafts. Refurbished driveshafts are available for each make and design of vehicle. They can be identified on the market place for a range of automobiles, such as passenger automobiles, trucks, vans, and SUVs.
Uncommon noises indicate that your driveshaft wants to be changed. Worn U-joints and bushings can cause abnormal vibration. These elements result in wear on other elements of the drivetrain. If you recognize any of these indicators, make sure you take your vehicle to the AAMCO Bay Spot Center for a thorough inspection. If you suspect hurt to the driveshaft, don’t wait an additional minute – it can be very dangerous.
air-compressor

The cost of changing the push shaft

The expense of replacing a driveshaft differs, but on average, this mend costs among $200 and $1,500. Whilst this price tag could differ by motor vehicle, the value of areas and labor is usually equivalent. If you do the restore oneself, you ought to know how significantly the components and labor will expense prior to you begin function. Some parts can be more expensive than other individuals, so it’s a good thought to compare the value of many spots ahead of choosing exactly where to go.
If you notice any of these symptoms, you should find a repair store instantly. If you are still not sure if the driveshaft is broken, do not drive the automobile any length until it is repaired. Indicators to search for contain absence of energy, difficulty relocating the automobile, squeaking, clanking, or vibrating when the vehicle is shifting.
Parts utilized in drive shafts incorporate middle assist bearings, slip joints, and U-joints. The cost of the driveshaft differs by vehicle and may possibly range by model of the very same year. Also, different types of driveshafts require diverse mend techniques and are considerably far more expensive. General, although, a driveshaft alternative charges in between $300 and $1,three hundred. The approach might take about an hour, depending on the vehicle model.
Many variables can lead to the want to replace the generate shaft, including bearing corrosion, destroyed seals, or other elements. In some instances, the U-joint indicates that the push shaft needs to be replaced. Even if the bearings and u-joints are in very good condition, they will eventually crack and call for the replacement of the travel shaft. Nonetheless, these components are not low-cost, and if a broken driveshaft is a symptom of a greater issue, you should get the time to exchange the shaft.

China supplier Planetary Gearbox Cast Iron Worm Gearbox Shaft Speed Reducer with Free Design Custom